• Sinoever patented hot wire heating technology, independent circulation air transport structure, up and down heating mode, high thermal efficiency, fast temperature rise, about 20 minutes from room temperature to set working temperature.
• The special high-temperature motor of Sanyue, Taiwan, is used to directly drive the hot air for heating. The hot air is balanced, with low noise and small vibration. The components of 0201 can not be displaced during transportation.
• Unique air duct design, the imported volute is equipped with three-layer air equalizing device, with uniform air transportation, large heat capacity, preheating area, constant temperature area and welding area heating up and down, independent circulation, independent temperature control, temperature control accuracy of each temperature area ± 1 ℃, and the furnace opening adopts pneumatic top cover type.
• Two forced cooling zones are equipped as standard, the cooling air temperature of the cooling air port can reach 5 ℃, and the cooling rate of the first cooling zone can reach - 5 ℃ / s. It can effectively meet all kinds of lead-free processes.
• It is suitable for adjusting temperature curves of various models, double welding area or three welding area. The minimum value of 8-wire profile test △ t can be up to 8 ℃. The connection curve test is specially corresponding to the lead-free welding process of Japanese or European and American standards.
• All electrical components are imported, and all signal wires are shielded to ensure long-term stable and reliable operation of smt24 hours, and three-year free warranty for high-temperature components.
|Heating zone||Upper 8 Zones||Upper 7 Zones||Upper 6 Zones||Upper 5 Zones|
|Bottom 8 Zones||Bottom 7 Zones||Bottom 6 Zones||Bottom 5 Zones|
|Number Of Cooling Zones||2|
|PCB Max Width||Rail Type 300mm, Mesh Belt 400mm|
|Transport Rail Widening Range||50-300mm|
|Transportation Direction||From Left To Right|
|Transport Rail Fixing Method||Front or rear|
|Transport Height||Mesh Belt 880±20mm, Chain 920±20mm|
|Type Of Shipping||Chain Drive + Mesh Belt Drive|
|Power Supply||5-Wire 3-Phase 380V 50/60HZ|
|Normal Loss Power||12KW||8KW||10KW||6KW|
|Heating Time||About 20 Minutes|
|Temperature Range||Room Temperature-350℃|
|Temperature Control Mod||Full Computer PID Closed Loop Control, SSR Drive|
|Temp Accuracy||± 1℃|
|Temperature Uniformity||± 3℃|
|Abnormal Alarm||Abnormal Temperature (High Or Low After Constant Temperature)|